Diamond Multi-Saw blades
and Segments for Granite Block Cutting
20-30pcs same diameter diamond saw blades per machine is
suitable for 4 column machine, such as 1200mm Multi-Blades, this
is popular out of China specially in Iran market.
10-20pcs different diameter(2) diamond saw blades per
machine is suitable for single arm machine, like 5 big 5 small blades
together(such as 5pcs 1600mm blades and 5pcs 1000mm blades, all segments
specification are same), actually this is popular in China during
2002-2005.
Diameter
Segment
Dimension
L × W × H
Segment
Number
On One Blade
Number
Of Blades
Using Together
800
24
× 7.5/6.5 × 12
66
10-20
900
24x7.5/6.5
× 12
64
20-30
1000
24
× 6.8/6.0 × 12
70
20-30
1200
24
× 7.5/6.5 × 12
80
20-30
1350
23.5
× 8.0/7.5 × 12
88
20-30
1600
23.5 × 8.5/8.0 × 12
108
10-20-30
Super Thin Diamond Multi-Saw blades
and Segments for Granite Block Cutting
This is quite popular cutting method in
China specially in ShuiTou,Quanzhou City from 2006, usually 4 or 5pcs
saw blades together with different diameter, which is better to cut soft
imported granite, hard granite also possible cut but the workers need
enough experiences. Same granite block, by this cutting method can cut
more SQM granite with lower diamond segments cost.
Our catchword:
In stone cutting field, anything is possible from China!
Diameter
Segment
Dimension
L × W × H ("/" means or)
Segment
Number
On One Blade
Steel Core Thickness
Number
Of Blades
Using Together
800
24x4.0/4.5/5.0x12/15
66
3.0 or 3.5mm
4 or 5 Difference Diameter Saw Blades
900
24x4.0/4.5/5.0x12/15
64
1000
24x4.0/4.5/5.0x12/15
70
1200
24x4.0/4.5/5.0x12/15
80
1300
24x4.0/4.5/5.0x12/15
88
1400
24x4.0/4.5/5.0x12/15
92
1600
24x4.0/4.5/5.0x12/15
108
The above specification is only for
Reference, other or special specification can be ordered by customers.
Wet use only with sufficient
water, Fast & Easy cutting,
long life, perfect performance.
Warning: Please use
high frequency Silver Welded machine to make the brazing, and
not
to use Fire to braze the segment to the saw blank, otherwise the diamond will be
damaged then the cutting performance will be influenced(Reduced)!
Recommendation: Please put 1.0%-1.5%
chemical material(Coolant Material) into the water to increase the cutting speed
& life.
Noted:
When place order for saw blades please inform
the following:
Diameter (Inch or mm)
Inner Hole Size (Inch or
mm)
Installation hole (If,
need drawing)
Segment No. (how many
pcs segment per blade)
Segment Size (L x W x H,
if possible please inform Steel Core Thickness)
Use of saw blade (For
Granite, or other material)
Saw Blades No. of the
machine (How many saw blades per machine)
Quantity NO. (How many
pcs, or how many sets segments)
Machine Powder, RPM
Feed Speed (M/Minute)
Expected Cutting Depth
(How many mm per time, forward or backward)
Expected Cutting Life (How
many SQM)
Coolant System (Water or
Oil, how many liters/Minute, etc.)
Expected Shipping Date
Special Requirements
(If)
If only order segments please inform the
following:
Diameter (Inch or mm)
Segment No. (how many
pcs segment per blade)
Segment Size (L x W x H,
if better to inform the Steel Core Thickness)
Use of saw blade (For
Granite, or other material)
Saw Blades No. of the
machine (How many saw blades per machine)
Quantity NO. (how many sets segments)
Machine Powder, RPM
Feed Speed (M/Minute)
Expected Cutting Depth
(How many mm per time, forward or backward)
