Small Diamond Saw
Blades (Diamond Dry Cutters
for Granite, Marble, Kinds of Stones)
(Dry or Wet
Use)
Types of
Diamond Dry Cutters
Code No.: JDKDC01
Normal Segmented
Dry Cutter
Code No.: JDKDC02
Normal Groove Type
Segmented Dry Cutter
Code No.: JDKDC03
Normal Continuous
Type with higher Segments Dry Cutter
Code No.: JDKDC04
SpiralWide Turbo Dry Cutter
Code No.: JDKDC5
Normal Segmented
Dry Cutter with Flange
Code No.: JDKDC06
SpiralWide Turbo Dry Cutter
with Protection
Code No.: JDKDC07
SpiralSegmented Wide Turbo Dry Cutter
with Protection
Specification as
follows:
Outer
Diameter
Inner
Hole
Segment
Thickness
Segment
Height
105mm
16/20/22.23
1.6/1.8/2.0
8/10
110mm
16/20/22.23
1.6/1.8/2.0
8/10
125mm
25.4/22.23/20
2.02.2
8/10/12
180mm
25.4/22.23/20
2.2/2.4
8/10/12
200mm
25.4/22.23/20
2.4/2.6
8/10/12
230mm
25.4/22.23/20
2.6/2.8
8/10/12
Suitable for the following Machines:
Electric angle grinder/Hand-hold
Table Saw/Portable masonry saw, Bench SawElectric and petrol High Speed Saw/Hand-hold
Joint Cutter/Floor Saw/Walking Machine/Wall tracking saw
Noted:
When place order for Dry
Cutters please inform
the following:
Diameter (Inch or mm)
Inner Hole Size (Inch or
mm)
Use of saw blade (For
Granite, or marble, or limestone, or Sandstone. or other material)
JDK's Code No.
Detailed Description with Photo (If your
product not available to see from the above)
Quantity NO. (How many
pcs)
Machine Powder/RPM (If
possible)
Expected Shipping Date
Special Requirements
(If)
For the user, the first
step is to know cutting machine kind, as power HP,
Rotary RPM,Max Cutting Depth and cutting material, and
Judge Cutting with water or without water.
The information will help clients to choose a correct
saw blade for this material.
Normally water can cool and removal clips.
Water is good for speed and life of blade, dry saw blade
issued where water is not availableor desired. It runs on high RPM machine to get
air-flow cooling.
